What are the characteristics and uses of high temperature and high efficiency Air Filter?
High temperature and high efficiency Air Filter is our main product, compared with other filters, its filter effect is very good, and can be used in high temperature environment. So, what is the characteristics of this high temperature and high efficiency Air Filter, where can be used to repair it?
First, the high temperature and high efficiency Air Filter features:
1, high temperature and high efficiency Air Filter with ultra-fine glass fiber filter paper for filter, to offset paper, aluminum foil and other materials folded for the separation, the new polyurethane sealant seal, galvanized sheet, stainless steel plate, aluminum alloy frame The
2, high temperature and high efficiency Air Filter stainless steel frame can increase the overall strength of the filter, aluminum foil board can protect the filter paper, reduce the wind resistance, as well as its glass fiber filter paper spacing increased filter area, so it has dust capacity, Resistance is small and the filter efficiency is very high.
3, high temperature and high efficiency Air Filter sealant can be 250 degrees Celsius environment in the long-term use, will not produce leakage.
4, high temperature and high efficiency Air Filter can withstand the instantaneous high temperature to 350 degrees Celsius, constant temperature up to 250 degrees, high temperature resistance, performance is very reliable.
Second, the use of high temperature and high efficiency Air Filter:
As the high temperature and high efficiency Air Filter filtration efficiency, high temperature resistance is good, so it uses a wide range, are:
1, high temperature and high efficiency Air Filter commonly used in air conditioning and ventilation system terminals, or hot air oven, oven, super clean oven;
2, high temperature and high efficiency Air Filter is also used for aerospace, electronics, semiconductors, optoelectronics, lenses and other manufacturing industries in the ultra cleanliness of the occasion;
3, high temperature and high efficiency Air Filter is also used for biopharmaceuticals, circuit boards, food processing and other purification equipment in the end of the temperature is relatively high, and the requirements of high cleanliness.
Third, the high temperature and high efficiency Air Filter how maintenance and maintenance
1, when the high temperature and high efficiency Air Filter used for some time, if the dust inside will be more, the wind resistance is relatively large, which requires the internal filter to be cleaned or replaced.
2, in the use of high temperature and high efficiency Air Filter in the process, should be regularly on the nozzle of the wind speed to check, if not meet the requirements to replace the filter.
3, replace the high temperature and high efficiency filter to be careful, can not damage the border and filter.
Affect the Air Filter life reasons, in addition to the advantages and disadvantages of the filter, there are two reasons:
First, the filter material in the filter area is too small or the capacity of the unit capacity of dust is too small;
Second, the filter efficiency of the pre-filter is low.
For the first reason, the use of large area of the filter significantly extend the service life, it is best to take this into account when the design, the project is completed after the transformation of the system to extend the life of the system to trouble.
For the second reason, you can adjust the filter efficiency of the Air Filter, the dust in the pre-filter outside the filter. For example, the end of the filter is F7, the use of G4 pre-filter when the end of the filter life is 3 months; switch to pre-F5 filter after the end of the filter life extended to six months. In the clean room, the value of the end of the high efficiency filter is not high, but the risk of replacement of the filter and the overhead will be high, and the replacement of the pre-filter without stopping, so experienced owners will focus on money and money in the pre-filter On the device.